|
|
WARRANTY INFORMATION:
 All Dyna-King products are guaranteed to be in perfect condition when assembled and sent out from the Cloverdale plant. All products have a lifetime warranty against defects in material and workmanship. The jaws have a warranty of two years. Should you find a defect, simply package and return the damaged product to the address given below. Warranty is void if the product has been abused, modified, damaged or used for any other purpose other than that for which it was intended.
Dyna-King, Inc.
Att: Returns Dept.
597 Santana Dr, Unit A
Cloverdale, CA 95425 USA
Ph# (707) 894-5566
|
|
CLEANING & MAINTENANCE:
To clean and maintain the vise so that it performs at its optimum capability, wipe it down with a soft cloth and light machine oil, or lubricant spray such as WD40. It is important to periodically unscrew the forcing cone and pull out the jaws in order to grease the inside of the forcing cone and the outside of the jaw shank, using a marine boat grease, household grease, or Vaseline.
If necessary, the vise may be returned to the Cloverdale factory for refurbishing. For a small fee, the vise is repolished, greased, jaws are serrated, and the entire vise tested to standard specifications. We perform the refurbishment and ship the vise back on the same day it is received.
|
| |
FREQUENTLY ASKED QUESTIONS:
|
Q:
A:
|
What is the hook range for the Dyna-King Jaws?
Dyna-King standard jaws can hold from an 8 to 10/O down to size 22. The midge jaw will hold from 10 to 28.
|
Q:
A:
|
Are there midge jaws available for all Dyna-King Vise models?
Yes, all models have midge jaws available, and easy-to-follow instructions are supplied for installation. When ordering midge jaws, be sure to specify which vise model they are for.
|
Q:
A:
|
What are the weight and dimensions for the Dyna-King pedestal base?
The Barracuda and Side-Winder models have the extra large pedestal base with a column for the shaft. They weigh approximately 6 lbs. and dimensions are 6" x 6.5".
The Professional, Supreme, Prince, Aristocrat, X-1, Barracuda Junior and Monarch models have the large size pedestal base with a column for the shaft which weighs approximately 4 lbs. and dimensions are 4" x 5.5".
The Squire & Duke Vises have a flat base where the shaft is threaded and screwed into the base. They weigh approximately 3.5 lbs. and dimensions are 4"x 5.5".
The Voyager's pedestal base is generally a lightweight delrin base weighing 3/4 lb. and dimensions of 4"x 5.5". Now available as a choice for the Voyager but at the same price, is a heavier base weighing approximately 3.5 lbs. Please specify which base you want at the time of purchase.
|
Q:
A:
|
Is there a price difference for a clamp or pedestal base model vise?
No. The price is the same for either a clamp or pedestal vise.
|
|
|
|
